Skip to content

Orbegozo Pressure Cooker Silicone Gasket HPL 4050 / 6050 Original Replacement

by Orbegozo
€7,95 - €7,95
€7,95
€7,95 - €7,95
€7,95

Original Orbegozo silicone gasket for HPL 4050 / HPL 6050 pressure cooker

The Orbegozo silicone gasket is the hermetic sealing part that fits into the inner edge of the lid and ensures that the pressure cooker seals tightly to the body. With use, gaskets harden, deform, or tear, and the pot begins to lose pressure around the lid. This original replacement restores your pot to its original performance.

Compatible models

  • Orbegozo HPL 4050 (4 liters)
  • Orbegozo HPL 6050 (6 liters)

Why choose the original Orbegozo gasket?

  • Perfect fit: designed with the exact lid size, without gaps or excess.
  • Food-grade silicone: suitable for direct contact with food at high temperatures.
  • Heat resistant: withstands repeated pressure and temperature cycles without degradation.
  • Tight seal: restores correct pressure and reduces cooking time.
  • Original replacement: guarantees durability and compatibility compared to generic gaskets.

Technical specifications

  • Part: Lid silicone gasket
  • Compatibility: Orbegozo HPL 4050 (4 L) and HPL 6050 (6 L) pressure cooker
  • Material: Food-grade silicone
  • Type: Original Orbegozo replacement part

When to change the gasket?

  • The pot takes longer to build pressure than before.
  • Steam escapes from around the lid during cooking.
  • The gasket looks cracked, deformed, or sticky.
  • More than 12–18 months of intensive use have passed.

As a general rule, a silicone gasket should be replaced every 1–2 years with regular domestic use. It is the part that suffers the most in a pressure cooker.

Warranty and shipping

Original Orbegozo replacement part with 3 years official warranty. Official Orbegozo distributor. Shipping available throughout Spain.

Frequently asked questions

Does it work for HPL 70 pots (4070, 6070, 12070)?

No. This gasket is specific for HPL 4050 and HPL 6050 models. For the HPL 70 series, you need a different gasket reference.

How is the gasket installed?

With the lid cold, remove the old gasket from the inner channel of the lid. Clean the housing thoroughly. Place the new gasket by pressing with your fingers around the entire perimeter until it is evenly seated. Do not force or cut anything.

Does it need to be lubricated?

It is not necessary. Some people apply a minimal touch of vegetable oil to the edge to facilitate the first seal, but the gasket does not require special maintenance.

How long does one of these gaskets last?

Between 12 and 24 months with regular domestic use. If you cook daily or use the pot with very greasy foods, the lifespan may be shorter.

How do I clean it?

By hand, with hot water and mild soap. Avoid dishwashers and harsh detergents: they accelerate the degradation of the silicone.

Why isn't my pot building pressure even with a new gasket?

If the gasket is new and there are still leaks, check the locking spindle, the regulating valve, and the cleanliness of the gasket channel. Any of these points can prevent a tight seal.

Can it be washed in a dishwasher?

It is not recommended. The heat and harsh detergents of the dishwasher accelerate the loss of elasticity of the silicone.